Smart dual sensor thermal imaging camera

Smart dual sensor thermal imaging camera

HP-KMS4300 intelligent dual sensor fixed-point thermal imaging camera, based on the latest fifth-generation uncooled infrared technology and high-definition visible light imaging technology, is specially designed and developed for the field of day and night surveillance.
  Details

Product introduction:

HP-KMS4300 intelligent dual sensor fixed-point thermal imaging camera, based on the latest fifth-generation uncooled infrared technology and high-definition visible light imaging technology, is specially designed and developed for the field of day and night surveillance. Infrared thermal image adopts high-sensitivity 384×288 resolution 12μm ultra-fine resolution uncooled focal plane imaging detector and miniaturized infrared lens, advanced digital circuit and image processing algorithm can provide delicate and smooth images; visible light adopts full HD color Black and white dual-mode low-light CMOS sensor and small high-definition day and night dual-use high-definition lens, the volume and weight of the whole machine are greatly reduced, which brings great convenience to users' installation and application. The overall shell is made of super-strong aluminum alloy to achieve IP67 protection level, which ensures the long-term operation of the equipment in harsh outdoor environments.


The dual-band camera has built-in intelligent temperature and hot spot detection algorithms, which can automatically detect long-distance flames, vehicles, personnel and other heat source targets, and can realize fire source detection and alarm display within a range of 300m, which is very suitable for key areas, battery manufacturing, and charging facilities. , Garage warehouses, factory parks, office areas, scenic forestry, animal husbandry grasslands, coal mines and other security and fire prevention warning monitoring.



Features:

1) It integrates infrared thermal imaging, high-definition visible light, infrared fill light, intelligent analysis, and sound and light alarm, with integrated design, high concentration, and easy installation and use;


2) The latest generation of VOx detector based on MEMS technology for thermal imaging, the detection sensitivity (NETD) can reach 50mk, which is higher than conventional products, obtains more delicate picture quality, and is less affected by fog, rain and snow;


3) Excellent non-uniform image correction technology with good image uniformity and dynamic range;


4) SDE image detail enhancement technology, the image is smooth and noise-free, a variety of pseudo-color and hot black and hot white polar image mode switching, strong adaptability, easy to find low-contrast hidden targets;


5) Visible light is based on full HD color/black and white dual mode low illumination CMOS sensor design, small size and light weight;


6) Support intelligent functions such as cross-border/intrusion detection, personnel gathering detection, and item left/take;


7) Support hotspot detection and alarming, based on the hotspot detection algorithm of each frame of the front-end raw data, short response time, fast locking speed, accurate positioning, no delay, alarm threshold, target size, and quantity can be set remotely;


8) Support sound and light alarm, when an alarm occurs, the tweeter + strobe light strobes to deter unlawful personnel and play an active defense role;


9) Based on IP full network design, one network cable can realize the interactive transmission of all video, alarm data, and positioning data, and the system networking and implementation are simple;


10) The whole machine adopts super-strong aluminum alloy shell, IP67 protection, anti-rain, anti-dust, and can adapt to various harsh environments.



Application scenarios:

Widely used in key areas, battery manufacturing, charging facilities, garage warehouses, factory parks, office areas, scenic forestry, animal husbandry grasslands, coal mines and other security and fire early warning monitoring.

  Parameter

Model name

KMS4300 intelligent dual sensor fixed-point thermal imaging camera

Distance

Detection: 1100m to vehicle, 450m to human, 520m to fire source (@2 × 2m)

Recognition: 310m for cars, 130m for people

Thermal imaging

1.Detector: fifth generation uncooled focal plane array VOX detector

2.Pixel: 384 × 288

3.Wavelength: 8-14 μm

4.NETD: 50MK (@25 ° C F1.0)

5.Field of view: 28.2 ° × 21.3 ° (F13MM, no thermal lens)

6.Image Enhancement: SDE Digital Image Enhancement Technology, enhance image details, support 255 levels of thermal image enhancement adjustment

7.Pseudo-color polarity: 18 pseudo-color images, hot black/white two polarity

8.Image parameters: AGC automatic gain control, brightness, contrast

9.Electronic multiples: 1.0-8.0 × continuous multiples (step size 0.1) , support global hawk-eye map and range ruler display simultaneously

10.Bad Spot Correction: support bad spot correction function

11.Image Correction: supports manual correction, background correction, automatic correction interval, adjustable Gamma correction parameters

12.Strong Light Protection: supports protection against Sun Damage

13.Non-uniformity correction: automatic/manual

Visible Light

 

1.Sensor type: 1/2.8 inch star-grade CMOS, integrated ICR dual filter day and night switching

2.Pixels: 5 megapixels, 2,592 × 1,944

3.Minimum illumination: color: 0.001 lux@black and white: 0.0001 lux@IR 0Lux

4.Field of view: 36 ° × 20 ° (F8 MM)

5.Image Processing: support white balance, electronic shutter, frame accumulation, backlight compensation, strong light suppression, 2D/3D digital noise reduction, electronic anti-shake, wide dynamic, anti-infrared overexposure

6.Diurnal light: 0.4-0.75 um visible spectrum window and 0.8-0.95 um near-infrared spectrum window day and night independent double light window, improve the signal-to-noise ratio of imaging light and stray light

Video and audio

1.Thermal image resolution: 1920 × 1080; 1280 × 1024; 1280 × 960; 1024 × 768; 1280 × 720; 704 × 576; 640 × 512; 640 × 480; 400 × 300; 384 × 288; 352 × 288; 352 × 240

2.Visible light resolution: 2592 × 1944; 2592 × 1520; 2560 × 1440; 1920 × 1080; 1280 × 1024; 1280 × 960; 1024 × 768; 1280 × 720; 704 × 576; 640 × 512; 640 × 480; 400 × 300; 384 × 288; 352 × 288; 352 × 240

3.Video Coding: H. 265/h. 264/MJPEG, supports multiple streams

4.Video rate: 32Kbps ~ 16Mbps, 60Hz30 fps

5.Audio Coding: G. 711A/G. 711U/G726

6.Image Flip: left/right/up/down/diagonal

7.Dual Light Fusion: supports 18 fusion modes

Intelligent function

1.Fire Detection Alarm: Threshold Level 255, target size, target number 1 -16 can be set, automatically select the most prominent target display, hot spot tracking

2.Intelligent Analysis: support for intrusion detection, cross-border detection, entry/exit zone detection, movement detection, loitering detection, people gathering, rapid movement, target tracking, item legacy, item retrieval; Person/vehicle target detection, face detection, and support for 16 regional settings

3.Intelligent information superposition: support 512 AR intelligent information superposition, support ignition point, intelligent analysis of video recording identification information superposition

4.Support Sound and light alarm: equipment internal integration soprano Speaker + Flash Flash, support for custom alarm voice, can customize alarm voice style and content

5.Privacy area covering: 32 covering areas can be set

6.Alarm management: Support Alarm Capture Upload: FTP/EMAIL/switch volume/message

Enhancements

1.Camera diagnosis function: support network alarm, support IP conflict alarm, support illegal access alarm (illegal access times, lock time can be set) , support SD card abnormal alarm (SD space is insufficient, SD card error, no SD card) , video occlusion alarm, anti-sun damage (support threshold, occlusion time can be set)

2.Information storage: Support Micro SD/SDHC/SDXC card (maximum support 512GB) , can support manual video/alarm video recording

3.Life Cycle Management: Health Index recording function (working time, shutter times, working temperature, limit temperature, etc.)

4.Address filtering: support IP address, MAC address black-and-white list filtering

5.Off-line continuous transmission: support

6.Power off memory: support

7.Keyframe settings: support for 100-level keyframe interval adjustable

8.Configuration File: Support Configuration File Import, export function

9.Web Access: support WEB full-featured configuration, remote online upgrades

The shield

1.Materials: investment casting aluminum alloy shell structure, integrated double window design

2.Window Glass: HLIN optical glass with high transmittance of over 98%

3.Surface spraying: PTA three anti-corrosion coating, anti-corrosion

Electrical interface

1.Communication and control: 1 RJ4510M/100M Adaptive Ethernet port, 1 alarm input, 1 alarm output, 1 audio input, 1 RS485 interface

2.Network protocols: support TCP/IP, UDP, ipv4; support HTTP, RTP, RTSP, NFS, DHCP, NTP, SMTP, DNS, FTP; support ONVIF2.0, GB28181, HP-SDK and other network protocols

3.Development interface: support SDK secondary development

Power consumption

1.Supply voltage: DC12V, with power supply AC220V adapter

2.Power consumption: ≤15W, ≤6.5 W@off

3.Poe Power: support

Environmental adaptation

1.Working Temperature: -40 ° C ~ 60 ° C

2.Working humidity: ≤95%

3.Waterproof rating: IP67

4.Protection Grade: anti-surge 6KV, anti-static 8KV contact/15KV air

Volume weight

1.Weight: 1.7 kg

2.Size: 261.7 mm × 139.5 mm × 103 mm (length × width × height)

3.Installation: wall-mounted/lifting/tripod-mounted



400-080-2208
Home

Home

product

product

Solution

Program

Contact

Contact